 |
 |
 |
|
Complete System with single "S" Series Hydrogen Generator, Coolant System, PWM, and MAP-MAF Enhancer for gas and diesel engines.
Features
System Includes:
(1) 21 Electrode High Efficiency S Series Hydrogen Generator
(1) MAP-MAF Controller
(1) Water Reservoir Coolant System with Hose and Fittings
(1) Pulse Width Modular with Constant Current Controller
Wiring is not included
OPTIONAL EFIE (ELECTRONIC FUEL INJECTION ENHANCEMENT UNIT) SOLD SEPARATELY!
***ON VEHICLES WITH GASOLINE ENGINES THE EFIE CONTROLLER IS NEEDED TO TUNE THE O2 SENSORS TO KEEP THE VEHICLES COMPUTER IN CLOSED LOOP FOR BEST SAVINGS***
DIESELS TYPICALLY DO NOT HAVE 02 SENSORS!
All product have a 1 year warranty |
|
|
|
|
|
 |
|
 |
|
Features
- Our Crown Jewel ~ Commercial Grade High efficiency series cell design.
- Unrivaled efficiency, production , life and durability
- These Dry cells are by far the best design in the world!
- Uses our super alloy electrodes ! up to 2.5 ~ 3 LPm output.
- insulated design, great for cold weather climates.
- Our new Constant Current PWM Controller and Module.
- This controller and module withhold a constant set current up to 45 amps, even if your electrolyte levels are increased. STOPS RUN AWAY AMPS!
- Controller
- •PWM LCD Display.
- •Convert your PWM to constant current.
- •Measures up to 100 Amps of direct current and 50 Amps of PWM.
- •Frequency 500,1000,1500,2000,2500,3000,3500,4000 Hz.
- •Duty range 0 - 100 %. •Life Time Timer to 65000 hours.
- •Temperature measurement from -20 to 257F (with optional external Temp sensor)
- •Great looking enclosure with precise one knob control.
- •White characters with blue illuminated background LCD display.
- PWM
- •Our new Micro PWM Controller (up to 45 amps). We have double mosfets for high performance, high speed cooling fan, a great set screw terminal block in the rear for the easiest wiring of any system on the market and an ACC wire so the systems auto shuts down when your key is off.
- •This unit also has set screw terminal blocks in the rear, all other units on the market require you to open the unit and solder your connections!
- •We have also integrated an ACC circuit that operates on milliamps so you can tie into the ignition coil power wire or any other 12V wire on your vehicle. This acts as a relay and auto shuts down your system when your key if off!
- •All others require the use of a relay!
|
|
|
 |
|
 |
|
|
| Accessories for this product... |
|
|
|
|
